NoobsPlanet

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics, posts and unlimited download to our resources, as well as connect with other members through your own private inbox!

Majove Install Mojave without mac on any desktop/laptop

noobsplanet

Active member
Staff member
Administrator
Moderator
We all have own reason to switch or sideload from windows to mac. some switches because they love the user interface of mac, some needs to use the software that are only available on mac or some just love to hackintosh such as me. Mojave was released just a month before and many hackintosher are willing to install it, experience the new back UI, new features but to make a USB installer you need a real mac or hackintosh (not VM) pc. And due to lack of real mac most of hackintosh lovers are stuck there and I have a solution for it. You don't need a real mac you can burn the USB straight from windows using Transmac and install it directly. Excited ?? let's get started!!


Requirements
- UEFI supported Desktop/Laptop
- 16 GB or higher USB disk
- 2 GB for Desktop or 4 GB for Laptop ram or higher recommended


Preparing USB
Download Link 1 Download Link 2
  • Download the Mojave Image from above link
  • Download and install Transmac
  • Put downloaded file Mojave and Transmac into Desktop
  • Insert USB drive and Open Transmac
  • Right click on USB drive and select Format Disk For Mac.
  • Once format is complete, again Right click and select Restore with disk image.
  • Wait for finishing task (usually takes between 30 to 45 minutes)
Configuring BIOS
Once transmac completes the task reboot your system and enter to BIOS, Press F2 fro dell , usually Del or ESC on Desktop and most of the laptops. Provide the BIOS password if you've set and restore default settings and make changes as below :
  • Set boot mode to UEFI
  • Disable secure boot
  • SATA mode to AHCI
  • Disable Intel Virtualization Support
  • Disable VT for Direct I/O
Remember you laptop BIOS settings may be different and may have different label than above mentioned but will have similar words, find it and configured as listed above. And don't forget to save the settings after you have made changes. Mostly F10 to save and exit the BIOS on older laptop and desktops.

Installing System
Plug in bootable USB and reboot, then select one time boot menu, mostly F12, you can find above one time boot menu into BIOS. You'll then get a one-time boot menu and select USB UEFI disk. Then, You'll be able to see a Clover boot screen and go to options and append boot arguments as kext-dev-mode=1 nv_disable=1 -v, then go to Graphics Injector > Inject Intel > and set Fake-Id to 0x12345678, then press Enter > ESC > ESC. Finally select Boot OS X from Install Mojave Bla.. Blaa... Blaaa...,

Now, you're at verbose mode, If you get stuck here then take picture of message and attach it below to get help form Noobsplanet. At this time if you're on laptop your keyboard or touchpad may not work, If this is your case you need to plug USB Keyboard or USB mouse on your laptop for setting up(Once, we install we'll fix this). Then from the GUI list, select Disk Utility and select partition and click on Erase. set name as "Noobsplanet HDD" and select OS X Journalised and click Erase. After Erase is complete exit the disk utility and select Install macOS mojave bla.. bla.. from list. Agree the license agreement then select Noobsplanet HDD and click Install. Again this will gonna take about 30 to 60 minutes.

Post Installation
After Installation is complete, like we did above first paragraph of Installing system, set Fake-id to 0x12345678 and append boot arguments as kext-dev-mode=1 nv_disable=1 -v, now from this time we'll be selecting the Noobsplanet HDD disk instead of Install OS X from Mojave. First time when you boot you'll be asked to login through your apple id. If you don't have one then you can skip then step and setup it later from preferences.

Once, You're at desktop you need to install the Clover to HDD to be able to boot without USB. Now you may have problems with keyboard, touchpad, mouse, usb, performance, graphics problem, battery draining, brightness issue and audio, etc. I won't go all detail on this, check our full playlist video on our channel (YouTube Channel ) or See our FAQ guide and old Sierra guide. Everything is explained detail. Explore the Noobsplanet site.!! If you need help please open a thread we're always happy to hear from you. :):)
Good Luck!! (y)(y)
 
Last edited:

ALiveVam

~~~~~~
Staff member
Moderator
Hi,
Will this work on non-UEFI system (DELL VOSTRO 3300) ?
The installation process will work for all laptops / desktop. but if your laptop build in Legacy(non-UEFI),Then you need to use Clover Legacy.
[For Windows]Bootable your flash drive by following the video guide. Then mount your EFI partition by following this guide.After mounting EFI partition, Attach Clover folder.

If you using Mac/Hackintosh, Then make your flash drive bootable using Etcher.app. You can normally mount USB EFI partition in Mac.
 

Wizard

New member
Please use signature for specification for your system. See here. And also attach the clover folder. Your above image doesn't have any clue that makes the system crash. Please attach the image before you get this bunch of error code.
It was really hard to take an image so I recorded a video and attached the clover file.
Thanks for the immediate response.
 

Attachments

noobsplanet

Active member
Staff member
Administrator
Moderator
It was really hard to take an image so I recorded a video and attached the clover file.
Thanks for the immediate response.
Make the following to changes on your BIOS
1.Disable VT-d CPU setting
2. Set XHCI Handoff to Enabled

I take look through video and the main error parts are not focus able by camera, I use step play and can see some visibility text and seems like problem with kexts or duplication of kext which is explained in Another Issue below, kext-dev-mode=1 is important and be sure that you append append boot arguments as kext-dev-mode=1 nv_disable=1 -v on your boot arguments and when you press ESC, make sure the boot arguments you added are still there.

Another Issue might be :
Your signature is wrong because 10.12 means Sierra not High Sierra, 10.13 mean to High Sierra and 10.14 means Mojave and so on. Now, You've using Mojave guide that already has a hackintosh installed. That means you've already installed clover on your HDD, now the thing you could make mistake is you're using the HDD Clover to boot into Mojave installer ? If yes then this matters, open the quick boot menu and select the proper boot drive i.e. USB UEFI drive. Basically what happens is when you use the clover of HDD then all the config.plist and clover will be used of that available on your HDD instead of USB.
 

Wizard

New member
Make the following to changes on your BIOS
1.Disable VT-d CPU setting
2. Set XHCI Handoff to Enabled

I take look through video and the main error parts are not focus able by camera, I use step play and can see some visibility text and seems like problem with kexts or duplication of kext which is explained in Another Issue below, kext-dev-mode=1 is important and be sure that you append append boot arguments as kext-dev-mode=1 nv_disable=1 -v on your boot arguments and when you press ESC, make sure the boot arguments you added are still there.

Another Issue might be :
Your signature is wrong because 10.12 means Sierra not High Sierra, 10.13 mean to High Sierra and 10.14 means Mojave and so on. Now, You've using Mojave guide that already has a hackintosh installed. That means you've already installed clover on your HDD, now the thing you could make mistake is you're using the HDD Clover to boot into Mojave installer ? If yes then this matters, open the quick boot menu and select the proper boot drive i.e. USB UEFI drive. Basically what happens is when you use the clover of HDD then all the config.plist and clover will be used of that available on your HDD instead of USB.
That's very generous of you that you reply that quickly.
I used boot arguments you mentioned above and I booted through usb not from my installed Clover and these settings you mentioned above are not present in my bios "Insyde H2o"
 

ALiveVam

~~~~~~
Staff member
Moderator
That's very generous of you that you reply that quickly.
I used boot arguments you mentioned above and I booted through usb not from my installed Clover and these settings you mentioned above are not present in my bios "Insyde H2o"
Delete your EFI/efi/clover folder and
Try this "Clover"
 

Attachments

wiednug

New member
hi,

Please help, stuck on this
macos 10.14

IMG_8250.JPG

Laptop : Dell Vostro 5459 | Processor: Intel Core i5 6200u Skylake 2.30GHz/2.40GHz | Memory: 8GB | GPU: Nvidia M930 4GB
 

dhanaveen

New member
hi thank ..

i am successful installed the mac OS Majove .After UR Post Installation utube channel link gettink below error . please share me the Post installatio Video.

I know windows very well . i don't no mac related os . please share me





channel (YouTube Channel )
 

Attachments

dhanaveen

New member
Hi thank u for once again..

i am completed Mac OS majove successfully . But after completed , i have some issues ..

1. after OS completion , i am removing My bootable pendrive ,Than Restart my laptop after not getting boot . Y ?

Touchpad and keyboard not working , lan not working , Wifi not working , if u don't mind can u please share me how to load drivers...
and without bootable usb how can boot .

Note. My Laptop model also same : Dell 5559 | i7 Processor 6500U | Intel HD 520 with AMD Radeon R5 M335 | 1366 x 768 | Windows 10

I am interested to learning mac os ...please tell. and ur Mac OS Majove video in the time of 08.36 after not understanding wich settings u made ...
 

noobsplanet

Active member
Staff member
Administrator
Moderator
I didn't change anything, I just followed the guide from YouTube
I mean to say that you've successfully installed Mojave on #Post11 and about fixing audio and brightness, which one you try first ? Try revert this changes. For example for brightness you need need SSDT-PNLF.aml in Clover/ACPI/patched/ folder and IntelBlackLight.kext in S/L/E/ and rebuild kernel cache. Now, the revert process would be delete SSDT-PNLF.aml from Clover/ACPI/patched/ and delete IntelBlackLight.kext in S/L/E/. That's it!!
 

noobsplanet

Active member
Staff member
Administrator
Moderator
hi thank ..

i am successful installed the mac OS Majove .After UR Post Installation utube channel link gettink below error . please share me the Post installatio Video.
I know windows very well . i don't no mac related os . please share me
channel (YouTube Channel )
Sorry that was my mistake please follow the Mojave playlist. and please read the FAQ that will be helpful and your profile is incomplete please complete your profile following this guide.
 

dhanaveen

New member
Hi

When i am install Installing Mac os sierra on dell 5559 , after fake id creation i have getting this error.after second one i have getting this issue

1545129392278.png
 

Attachments

Last edited by a moderator:
Top