NoobsPlanet

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics, posts and unlimited download to our resources, as well as connect with other members through your own private inbox!

Installing Mojave on my HP 250 G6

lofster

New member
Hello!

I'm following your tutorial for installing Mojave, but I can't boot into the installation, it gives me MACH reboot error.

What should I do?

My specs are in the signature
 

lofster

New member
Also, I've accessed the EFI partition but since it had problems, and no plists or any kinds of folders I've downloaded the latest Clover x64 ISO and pasted the contents in the partition, but for some reason now there is no option to boot the installation, just the Windows.

I've also used the RehabMan's HD 520 config.plist, but I can't see how it works due to my installation being "unexisting."
 

noobsplanet

Active member
Staff member
Administrator
Moderator
Also, I've accessed the EFI partition but since it had problems, and no plists or any kinds of folders I've downloaded the latest Clover x64 ISO and pasted the contents in the partition, but for some reason now there is no option to boot the installation, just the Windows.

I've also used the RehabMan's HD 520 config.plist, but I can't see how it works due to my installation being "unexisting."
ok try this Clover v2.4k r4862 I provided, Delete Apple, Boot and Clover Folder from EFI then place the extract the files I have provided into EFI. The files are provided into two parts due to upload size limitation in this site. This is the RehabMan OS X config.plist, some minor settings may have been tweaked. so, if this gives you the problem, then please replace the config.plist with RehabMan. And there is also config-bak.plist which you may try switching. Please don't forget to set the fake-id to 0x12345678, without this you'll get the boot loop.

Clover/Kexts/Other/ have almost all necessary kext, so your laptop will be able to function almost all functionality such as Keyboard, Touchpad, Bluetooth, audio, etc. from the first install.
 

Attachments

noobsplanet

Active member
Staff member
Administrator
Moderator
This is where I get stuck using both configs, both -bak and normal
Seems like DSDT issue, double check if any files are available on ACPI/Patched/, For me I used DSDT patches before and just removed to provide the files for you. please download the original config.plist for Intel HD 520 and named it as config.plist and backup mine with config-noobs.plist. And boot in verbose mode. What do you get, attach the clear screenshot here. The screenshot attached above text can't be readable properly.
 

lofster

New member
Seems like DSDT issue, double check if any files are available on ACPI/Patched/, For me I used DSDT patches before and just removed to provide the files for you. please download the original config.plist for Intel HD 520 and named it as config.plist and backup mine with config-noobs.plist. And boot in verbose mode. What do you get, attach the clear screenshot here. The screenshot attached above text can't be readable properly.
Sounds like a plan, gonna do it right now
 

noobsplanet

Active member
Staff member
Administrator
Moderator
Getting the same error
Make sure your BIOS settings are correct. BIOS settings should look like below :
  1. Load Optimized Defaults
  2. Disable VT-d
  3. CFG-Lock, disable it
  4. Secure Boot Mode, disable it
  5. Set OS Type to Other OS
  6. IO Serial Port, disable it
  7. Set XHCI Handoff to Enabled
  8. If you have a 6 series or x58 system with AWARD BIOS, disable USB 3.0
  9. 10. Save and exit.
However, Not all system will have above mentioned settings on BIOS, you may ignore if you didn't find. Also add kext-dev-mode=1 -no_compact_check
 

noobsplanet

Active member
Staff member
Administrator
Moderator
I'm still getting the exact same error
Strange error!! delete VoodooPS2Controller.kext from Clover/Kexts/Other folder this time. If this didn't work for your I suggest you to try different clover, if you get same error with different clover as well then you have some hardware related issue, that you need to seriously look at your BIOS.
 
Top